C!T ROM 3/ct-rom iiib.zip/ct-rom iiib/CTSELECT/QEDIT/QEDIT3.ZIP/QCONFIG.DAT

Text File | 1994-02-25 | 8KB | 349 lines

*
*  QCONFIG.DAT:  Default config file for QEdit 3.0
*
*  Keys _must_ start in column 1.
*
*  Lines starting with '*' (like this one) are ignored.
*
*  To use enhanced keyboard keys (f11, f12, ^cursorup/down, etc) the
*  'test for presence of enhanced keyboard' option _must_ be turned on by
*  running qconfig.
*
*  Specify control-key commands via: ^f1 - This means Control-F1
*  Specify alt-key commands via: @f1     - This means Alt-F1
*  Specify shift-key commands via: #f1   - This means Shift-F1
*
*  There is also a provision for "two key commands".
*  For example, to make the Control-F1, Control-F2 sequence issue the
*  exit command, try the following:
*
*  ^f1_^f2     Exit
*
*  The key here is that the keys must be separated by a '_'.
*
*  Multiple commands and/or text may be assigned to a key (or a twokey).  To do
*  so, simply place multiple commands after the key.  If the commands are to be
*  continued on more than one line, then each suceeding line must start in
*  column 2 or greater.  For example:
*
*  f1  EditFile 'help.dat' Return
*
*  This command would load the file 'help.dat'.  Note the return command is
*  issued after the text.  This is required to terminate the QEdit prompt.
*
*  Following is a macro that will run MAKE and load the results into a window:
*
*  f1   EditFile 'errors.lst' Return
*       Quit Dos 'make >errors.lst' Return Return
*       HorizontalWindow EditFile 'errors.lst' Return
*
*  Following macro will run Turbo C on the current file:
*
*  f1   GSave Dos 'tcc -y -M ' CurrentFilename Return
*
*  Finally, you can also use the scancode to represent "special keys", as
*  long as this key returns a ascii character code of 0.
*  For example Alt-F9 returns an ascii character of 0 and a scan code of
*  112 decimal.  To make Alt-F9 issue the EditFile command, you could:
*
*  112  EditFile
*      or
*  @f9  EditFile
*
*  Either will work.  This becomes especially useful if you have a macro
*  processor and/or special keyboard that has extended keys that QEdit
*  doesn't have names for.  This gives you a method to use them.
*
*  Note that the order of this file is NOT important.  Arrange it however
*  makes sense to you.
*

*
* function key set
*

f1               QuickHelp
f2               AddLine
f3               GPQuit
f4               DupLine
f5               MakeTopOfScreen
f6               DelToEol
f7               MarkBlockBegin
f8               MarkBlockEnd
f9               Shell
f10

* enhanced keyboard only
f11
f12

#f1              ToggleBoxDraw
#f2
#f3              Sort
#f4
#f5              MakeCtrOfScreen
#f6
#f7              ShiftLeft
#f8              ShiftRight
#f9
#f10

* enhanced keyboard only
#f11
#f12

^f1              ToggleEGA43
^f2
^f3
^f4
^f5
^f6
^f7
^f8
^f9
^f10

* enhanced keyboard only
^f11
^f12

@f1              ToggleBoxType
@f2              InsertLine
@f3              Match
@f4
@f5              ScreenLeft
@f6              ScreenRight
@f7
@f8
@f9              Dos
@f10             ShowEntryScreen

* enhanced keyboard only
@f11
@f12

*
* special keys
*

cursorup         CursorUp
cursordown       CursorDown
cursorleft       CursorLeft
cursorright      CursorRight
^cursorleft      WordLeft
^cursorright     WordRight
home             BegLine
end              EndLine
^home            BegScreen
^end             EndScreen
pgup             PageUp
pgdn             PageDown
^pgdn            EndFile
^pgup            BegFile

#tab             TabLt
tab              TabRt

ins              ToggleInsert
del              DelCh

backspace        Backspace
^backspace       DelLtWord

enter            Return
^enter           ExecuteScrap

escape           Escape

grey*            Paste
grey+            Copy
grey-            Cut
#del
#ins
`
~
/

^prtsc           PasteOver
^2
^6
^[
^\
*
* Macro to edit the file whose name is sitting at the cursor in the editor
*
^]                 AltWordSet MarkWord jFalse done: Copy EditFile Paste
                Return done: DefaultWordSet

^-                 GetPrev

*
* alternate keys
*

@a               DropAnchor
@b               WrapPara
@c               CopyBlock
@d               DelLine
@e               EditFile
@f               MainMenu 'f'
@g               DeleteBlock
@h               QuickHelp
@i               ToggleTabsOut
@j               JoinLine
@k               MarkColumn
@l               MarkLine
@m               MoveBlock
@n               NextFile
@o               ChangeFilename
@p               MainMenu 'p'
@q               MainMenu 'q'
@r               ReadBlock
@s               SplitLine
@t
@u               UnmarkBlock
@v               ToggleTabsExpand
@w               WriteBlock
@x               GExit
@y               GSave
@z               CopyOverBlock
@1               Upper
@2               Lower
@3               Flip
@4
@5
@6
@7
@8
@9
@0
@-
@=              MarkWord MacroQuitFalse Copy Find Paste Return Return

*
* control keys
*


^a               WordLeft
^b_a             AppendScrBuff
^b_d             DelScrBuff
^b_l             GetScrBuff
^b_s             StoreScrBuff
^c               PageDown
^d               CursorRight
^e               CursorUp
^f               WordRight
^g               DelCh
^h               Backspace
^i               TabRt
^j               GotoLine
^k_b             MarkBlockBegin
^k_c             CopyBlock
^k_d             Exit
^k_e             EditFile
^k_f             ChangeFilename
^k_h             UnmarkBlock
^k_k             MarkBlockEnd
^k_l             FillBlock
^k_n             NextFile
^k_p             PrevFile
^k_q             PQuit
^k_r             ReadBlock
^k_s             SaveFile
^k_t             MarkWord
^k_v             MoveBlock
^k_w             WriteBlock
^k_x             File
^k_y             DeleteBlock
^k_z             KillFile
^l               RepeatFind
^m               MacroRecord
^n               SplitLine
^o_c             CloseWindow
^o_g             GrowWindow
^o_h             HorizontalWindow
^o_l             SetPrintLeftMargin
^o_n             NextWindow
^o_o             OneWindow
^o_p             PrevWindow
^o_r             SetRMargin
^o_s             ShrinkWindow
^o_t             CenterLine
^o_w             ToggleWordWrap
^o_z             ZoomWindow
^p               Literal
^q_a             FindReplace
^q_b             GotoBlockBeg
^q_c             EndFile
^q_d             EndLine
^q_e             BegScreen
^q_f             Find
^q_i             ToggleIndent
^q_k             GotoBlockEnd
^q_l             UndoCursorline
^q_p             PrevPosition
^q_q             RepeatCmd
^q_r             BegFile
^q_s             BegLine
^q_t             ToggleSmartTabs
^q_x             EndScreen
^q_y             DelToEol
^r               PageUp
^s               CursorLeft
^t               DelRtWord
^u               UnKill
^v               ToggleInsert
^w               ScrollUp
^x               CursorDown
^y               DelLine
^z               ScrollDown

*
* other enhanced only keys
*
@'
@,
@.
@/
@;
@[
@\
@]
@`
@backspace
@enter
@escape
@grey*
@grey+
@grey-
@grey/
@greycursordown
@greycursorleft
@greycursorright
@greycursorup
@greydel
@greyend
@greyhome
@greyins
@greypgdn
@greypgup
@greyenter
@tab

greyenter        Return
^greyenter       ExecuteScrap
^centercursor
^cursordown      LineDown
^cursorup        LineUp
^del

^grey*
^grey+
^grey-
^grey/
^ins
^tab

centercursor